Product Description
FLUORESCENT
Fluorescent Polylactic Acid or Polylactide (PLA) 3D printing filaments are a corn based product made from high purity, high temperature pellets. It is a normal PLA in which we incorporated a fl uorescence formula to make this fi lament shinier and give it a special appearance. It does not require a heated print bed and easily adheres to masking tapes. It is very hard, acetone resistant and can achieve faster print speeds and lower layer heights when properly used. The PLA Fluorescent print temperature is 180 °C to 230 °C / 356 °F – 446 °F. (Temperatures may vary between printers and colours) and if a heated bed is used the bed temperature should be 60 °C / 140 °F. It is the optimal choice for use in homes, schools and makers / hobbyists workshops or studios.
Catalog Number |
Color |
---|---|
PLA18FLGR1 | Green |
PLA18FLRE1 | Red |
PLA18FLYE1 | Yellow |
Features
- High purity Polylactic Acid or Polylactide (PLA)
- Shinier surfaces
- Made from renewable resources
- Can achieve faster print times
- Can be used in high resolution applications
- Acetone resistant
- 1.75mm diameters
- Low Diameter variance
- RoHS compliant
- First layer temperature: 200 °C / 392 °F
- Print temperature: 180 °C – 230 °C / 356 °F – 446 °F
- No heated bed required
- Bed surface: Masking tape
- Offered 1kg spools