WOOD17W1 Wood 3D Filament

Wood Filament is made with a blend of polylactic acid (PLA) and wood particles.


Product Description


Wood Filament is made with a blend of polylactic acid (PLA) and wood particles. This material can be sanded and painted and has a sweet odour of wood. It has the ease of use similar to PLA and is great for artists and hobbyists who are looking to experiment with different printing materials. Printing temperature is 185° – 230° C (365°- 446° F). Varying Temperatures will affect the colour of the final product. No heated bed is required.

It is highly recommended this product be used with 0.5 mm nozzles or larger to avoid clogging.

Try to avoid letting the filament sit in the hot end for any length of time while it is hot, as this tends to cause clogging.
Wood fibers collect at the tip when left sitting in the hot end. Once it is printing keep it going. If you have to stop to do adjustments etc.. either pull the filament out of the hot end or let it cool down till you are ready to start printing again. These extra few steps will save you a world of time.

Blend of PLA and 20-25% Poplar wood particles

Catalog Number




WOOD17W5 0.50 kg Wood 1.75 mm
WOOD17W1 1.00 kg Wood 1.75 mm
WOOD30W1 1.00 kg Wood 2.85 mm
WOOD17D1 1.00 kg Dark Wood 1.75 mm




  • Blend of Polylactic acid (PLA) and 25%-30% poplar wood particles
  • Sandable and paintable
  • Easy to use
  • Print temperature: 185° – 230° C
  • No heated bed required
  • Bed surface: Masking tape
  • Offered in 0.5kg and 1kg spools
  • 3D Printing
  • Makers / hobbyist projects
  • Classroom / Training
<< return to products