PLA17THRE1 Thermochromic Polylactic Acid or Polylactide (PLA) 3D printing filaments

Thermochromic Polylactic Acid or Polylactide (PLA) 3D printing filaments

SKU: PLA17THRE1

Product Description

GLOW IN THE DARK (PLA)

Thermochromic Polylactic Acid or Polylactide (PLA) 3D printing filaments are a corn based product made from high purity, high temperature pellets. It is a normal PLA formulated to provide a discoloration effect when exposed to heat. It does not require a heated print bed and easily adheres to masking tapes. It is very hard, acetone resistant and can achieve faster print speeds and lower layer heights when properly used. The PLA Thermochromic print temperature is 180 °C – 230 °C / 356 °F – 446 °F (Temperatures may vary between printers and colours) and if a heated bed is used the bed temperature should be 60 °C / 140 °F. It is the optimal choice for use in homes, schools and makers / hobbyists workshops or studios.

Red colour changes to natural at 43 °C / 109 °F

Catalog Number

Color

PLA17THRE1 Red

 

PLA Features

  • High purity Polylactic Acid or Polylactide (PLA)
  • Made from renewable resources
  • Can achieve faster print times
  • Can be used in high resolution applications
  • Acetone resistant
  • 1.75mm diameters
  • Low Diameter variance
  • RoHS compliant
  • First layer temperature: 200 °C / 392 °F
  • Red colour changes to natural at 43 °C / 109 °F
  • Print temperature: 180 °C – 230 °C / 356 °F – 446 °F
  • No heated bed required
  • Bed surface: Masking tape
  • Offered 1kg spools